Notebook : Lenovo Ideapad 305-15Ibd [Mt : 80Nj] (Disassembly)

Another posting for disassembly of a Lenovo notebook, the access to the RAM too HDD upgrade is really unproblematic but to service the CPU's fan or refreshing the thermal chemical compound required farther steps every bit below :-

1. Remove the piece of cake access cover, screws set every bit highlighted alongside arrow.

2. After removed, it volition reveals the RAM slots too the HDD. Even access to the CMOS battery too the Wireless bill of fare is visible.

At this phase yous tin easily upgrade the RAM or the HDD but if yous wanted farther access such every bit to the CPU so continue to pace #3 below.

3. Remove those screws every bit per highlighted inwards arrow below.

4. Turn over to take away the keyboard panel.

5. Carefully too piece of cake tegument the keyboard panel to let on the bezel. Becareful of the keyboard's ribbon cable every bit usual.

As this unit of measurement was serviced before, hence I did noticed about missing screws which was supposed to live on at that topographic point but aren't. As such I was unable to determined the actual screws place for this bezel.

6. Now piece of cake too carefully take away the keyboard's bezel for the mainboard access.

7. Next is to disconnect those ribbon cables every bit circled inwards cerise too take away the screws every bit per arrows shown below.

8. Once yous convey done that, piece of cake flip over the mainboard to access the CPU's heatsink too fan, at that topographic point yous tin continue to refresh the thermal chemical compound too construct clean the heatsink too fan.

This model is really piece of cake too convey unproblematic access, yous only involve to live on really meticulous inwards looking for the screws every bit its really obvious too noticeable.


!!! HAPPY COMPUTING !!!

Share this post